Acarsdeco2 Windows Verified ^hot^ Now

Older SDRs might have a PPM offset. Use the --ppm flag in your batch file to calibrate it.

Extract the ZIP file to a dedicated folder, such as C:\ACARS\acarsdeco2 .

--freq : These are common ACARS frequencies in North America/Europe. Research your local region for the best results. acarsdeco2 windows verified

Before you begin the "verified" setup, ensure you have the following: An RTL-SDR Blog V3 or similar is recommended.

Once you run your .bat file, a command prompt window will open. To verify it is working: Older SDRs might have a PPM offset

Ensure Windows Firewall isn't blocking the port you assigned (e.g., 8080). Conclusion

If your gain is too high, it might drown out the signal; if too low, you won't pick anything up. Experiment with values between 30 and 45. --freq : These are common ACARS frequencies in

Save this file as start_acars.bat inside your Acarsdeco2 folder. Key Parameters Explained: