Alcor Micro Unknown Fa00 - F W 3613 !new! Site

The NAND flash chip is wearing out. You can try setting the "Scan Level" to a deeper cycle in the AlcorMP settings to "wall off" the dead sectors.

Note down the (Vendor ID) and PID (Product ID)—usually 058F and 6387 for Alcor. Step 2: Download the Correct Alcor MPTool alcor micro unknown fa00 - f w 3613

Search for "AlcorMP" followed by your controller part number (e.g., "AlcorMP AU6989"). The NAND flash chip is wearing out

The status bar will turn yellow (processing) and then green (pass). If it turns red, the memory chip itself might be physically dead. Troubleshooting Common Failures alcor micro unknown fa00 - f w 3613