for standard units; the variant offers a faster opening speed of Mounting Height: The unit must be installed at least above the floor for safety. 2. Mechanical Installation Steps Follow these sequential steps to mount the drive unit:
The lamp lights up when the door reaches pre-set cycles (e.g., cycles for CDM9) or after Voltage Checks: Verify crawford cdm9 950 installation manual top
Connect the operator cables to the Manoeuvring Card inside the control box. Ensure the C-card (main logic) is seated correctly in the lid. Initial Startup: Disconnect power before making any wire changes. Position the door manually about above the ground. Set the SW1 (Installation Switch) to ON . for standard units; the variant offers a faster
The features a service lamp and a display for error codes. Ensure the C-card (main logic) is seated correctly
Mount the torque bar onto the mechanical unit. Place the rubber damper between the torque bar and the console to absorb vibration.