Cwfl-6000 Manual

Up to 15kW depending on ambient conditions. Temperature Stability: ±1°C. Refrigerant: Environmentally friendly R-410a.

To keep your 6kW laser running at peak efficiency, follow this maintenance checklist: cwfl-6000 manual

Connect the "Water In" and "Water Out" ports to your laser equipment. Ensure all clamps are tight to prevent leaks. Up to 15kW depending on ambient conditions

If your chiller starts beeping, check the display for these standard codes found in the : E1 Ultrahigh room temperature Improve ventilation or lower room temp. E2 Ultrahigh water temperature Check for clogged dust gauze or pump failure. E3 Ultralow water temperature Normal in winter; use a heater if necessary. E4 Room temp sensor failure Inspect sensor wiring or replace sensor. E5 Water temp sensor failure Check the probe connection. E6 Water flow alarm Check for kinked hoses or low water levels. 🧹 Maintenance Schedule To keep your 6kW laser running at peak

According to the , following these steps ensures machine longevity:

Replace the internal ion exchange filters and PP cotton filters to maintain water purity.

Check the water level and inspect hoses for signs of wear.