For most modern systems, the FS-SM100 is "Plug and Play" and uses the standard driver. However, if your PC fails to recognize it, follow these steps:
A rapidly blinking red LED on the USB dongle typically indicates a successful data connection. 5. Essential Links & Downloads
If it appears as an "Unknown Device" in the Windows Device Manager, you may need the Silicon Labs CP210x USB to UART Bridge driver or a generic PPM driver often provided by the seller. Fs-sm100 usb driver
For many setups, keep the transmitter turned off . Plugging into the trainer port will often power the internal logic board without activating the RF module, saving battery and preventing interference.
Always calibrate your sticks inside the simulator software (e.g., ClearView or FPV Freerider) before flying to ensure the range of motion is mapped correctly. For most modern systems, the FS-SM100 is "Plug
Plug the trainer port adapter into your transmitter, connect it to the 3.5mm jack of the SM100 cable, and plug the USB end into your PC.
If you encounter problems getting your sticks to respond, try these expert fixes: Essential Links & Downloads If it appears as
Officially supports Windows 10, 8, 7, and XP . It is generally not compatible with macOS . 3. Step-by-Step Driver Installation