Jte Inverter Manual ((install)) ✨

Connect exclusively to the P+ and PB terminals.

Proper wiring is vital for operational stability. Always disconnect input power before starting work. Standard Specifications (Typical 380V Models) AC 380V 3-phase (-15% to +10%) or 220V single-phase MPPT Range 450VDC–750VDC for 380VAC models Output Frequency 0–50Hz/60Hz Overload Capacity 150% for 1 minute; 180% for 10 seconds Key Wiring Rules: Jte Inverter Manual

If the inverter encounters an issue, the display will flash a fault code. Regular inspection of motor insulation (minimum 5MΩ) is recommended to prevent secondary inverter damage. 用户手册 Connect exclusively to the P+ and PB terminals

Install on metal or other non-flammable surfaces. Ensure the support can hold at least four times the inverter’s weight. Ensure the support can hold at least four

Maintain an ambient temperature between -10°C and 50°C. For altitudes above 1,000 meters, derate the output current by 1% for every 100 meters.