Keyence Gs-11pc Manual -

Industrial safety standards (ISO 13849-1) require periodic testing of interlock devices.

Highly visible LEDs provide instant feedback on the door status (locked/unlocked) and sensor health.

Its compact footprint allows for mounting in tight spaces where traditional mechanical interlocks cannot fit. keyence gs-11pc manual

Proper wiring is essential to ensure the safety circuit functions as intended. The GS-11PC uses a standard 8-pin M12 connector. 1. Wiring Pinout (PNP) +24 VDC. Blue: 0 V. White: OSSD 1 (Safety Output). Black: OSSD 2 (Safety Output). Grey: AUX Output (Non-safety, used for PLC monitoring). Pink: Reset/EDM Input. 2. Mounting the Actuator

The GS-11PC model is a PNP output type sensor that utilizes a dedicated actuator to monitor the status of doors, gates, and safety guards. Proper wiring is essential to ensure the safety

The sensor and actuator must be mounted so that the sensing faces meet when the guard is closed. Ensure the gap between the sensor and actuator does not exceed the specified sensing range (usually 5-10mm for stable operation). 3. Alignment Indicators Guard is closed and safety outputs are ON. Red: Guard is open or misaligned; safety outputs are OFF.

To get the most out of your hardware, tell me if you'd like more info on: multiple GS units Specific PLC wiring diagrams Choosing between PNP and NPN models Wiring Pinout (PNP) +24 VDC

Indicates an OSSD short circuit. Check your wiring for pinched cables or cross-talk between the white and black wires.