: Click Start Upload . If the project is not password-protected or restricted, the software will transfer the project files, including variables and graphics, to your PC. Method 2: Backup to a USB Flash Drive
: Connect your PC to the HMI using a USB communication cable or an Ethernet (LAN) cable.
: Look for the file operation icons. For example, in some TPC series menus, a disk icon with a green arrow typically represents the Backup (archive) function. mcgs hmi backup
If using Ethernet, scan for the device or enter its specific IP address.
: Access the panel's internal settings. On many MCGS models, this involves a specific touch sequence or finding the "Service and Commissioning" or "File Operations" menu. : Click Start Upload
: Launch the MCGS configuration tool on your computer.
If you do not have a PC on-site, you can use the built-in file management tools on the HMI to create a backup on a . : Look for the file operation icons
Performing a regular is a critical maintenance task to protect industrial automation projects from data loss due to hardware failure or accidental deletion. Whether you are working with the TPC series or other embedded models, there are two primary methods for backing up your system: using a PC with configuration software or using a USB flash drive directly at the panel. Method 1: Backup via PC and MCGS Software
