Store in original, tightly closed containers in a cool, dry place (below 40°C). Application Best Practices
For the , surfaces must be clean and free of dust, oil, or grease. Porous substrates should be pre-soaked with water for 30 minutes before application. nitocote+pe135+msds+best
Nitocote PE135 Protective Coating Guide | PDF | Solid - Scribd Store in original, tightly closed containers in a
If contact occurs, wash with soap and water immediately. Avoid using solvents for skin cleaning. Nitocote PE135 Protective Coating Guide | PDF |
Wear safety goggles and chemical-resistant gloves (neoprene is recommended) during application.
The formula is solvent-free, non-toxic, and free from hazardous materials like coal tar pitch or asbestos. Technical Specifications Density (@ 27°C) 1.28 ± 0.03 g/cc Solids Content (Volume) ASTM D2697 Adhesion Strength >1.0 N/mm² ASTM D4541 Water Absorption BS 1881 Pt. 122 Water Permeability DIN 1048 Pt. 5 Surface Dry Time 10–15 min (@ 35°C) ASTM D1640 Nitocote PE135 MSDS & Safety Guidelines
Unlike many traditional coatings, Nitocote PE135 can be applied to damp concrete just 24 hours old.
Less Ads!