Your input will help us improve your experience.You can close this popup to continue using the website or choose an option below to register in or login.
Disconnect the wiring harness (often a 4-pin Deutsch DT series) and remove the mounting bolts.
Connect the 690V AC input (L1/L2/L3) and the DC bus terminals. The "+DC" suffix indicates integrated terminals for direct connection to the braking resistor bank.
Installation should only be performed by qualified personnel familiar with medium-voltage systems. rec12-690 dc manual
Cross-reference the part number (e.g., 60010145 or REC12-690+DC ) with your machine's service manual. Step-by-Step Installation
Rec12-690 Dc Manual
Disconnect the wiring harness (often a 4-pin Deutsch DT series) and remove the mounting bolts.
Connect the 690V AC input (L1/L2/L3) and the DC bus terminals. The "+DC" suffix indicates integrated terminals for direct connection to the braking resistor bank.
Installation should only be performed by qualified personnel familiar with medium-voltage systems. rec12-690 dc manual
Cross-reference the part number (e.g., 60010145 or REC12-690+DC ) with your machine's service manual. Step-by-Step Installation
Verify the module matches the exciter's open-circuit voltage. You can find the REC12-690 + DC Disconnect the wiring harness (often a 4-pin Deutsch
is designed for long-term durability, but maintenance is required to prevent failure in high-traffic or extreme environments.
IP20 (protected against solid objects >12mm, but must be housed in an enclosure to protect against dust and moisture). Installation should only be performed by qualified personnel
Typically encased in blue plastic housing, weighing approximately 0.25 lbs. 2. Installation Guide