The programmer/computer is designed for a standard 6.25-inch radio rack. Position within easy reach of the pilot.
Ground shields at the programmer end only to prevent ground loops. Circuit Protection: Use a dedicated 5-amp circuit breaker. S-tec 55x Installation Manual
Use the correct tension specified in the S-TEC airframe-specific kit. The programmer/computer is designed for a standard 6
Verify the yoke-mounted disconnect button kills power to the servos immediately. 🛩️ Flight Calibration S-tec 55x Installation Manual
Check that servos do not hit their internal stops before the flight controls hit their external stops.
Keep high-current wires away from the magnetic compass or AHRS units. 4. Pitot-Static Integration
The System 55X requires a connection to the aircraft’s static system for altitude functions.