Four-digit dual LED display showing both the PV (Process Value) and SV (Set Value). Dimensions: Standard 48x48mm (1/16 DIN) panel mounting. Power Supply: Operates on AC 100-240V at 50/60Hz. Wiring and Installation Guide
Sinotimer devices are built to resist dust and moisture, but they should still be housed in a proper enclosure for longevity in harsh environments. Temperature Controller - Sinotimer sinotimer mc101 manual
0.3% measurement accuracy with a maximum resolution of 0.1°C for thermocouples and RTDs. Four-digit dual LED display showing both the PV
Connect the resistor element between Terminals 8 and 9 , with the third "extra" wire going to Terminal 10 . Control Output: Wiring and Installation Guide Sinotimer devices are built
If using an SSR to control a high-current load, always attach a heat sink to prevent the relay from overheating.
Ensure the thermocouple type set in the software matches the physical sensor connected to avoid incorrect readings.