Manual Pdf | Strands S68

Keep the vertical screw clean and lightly greased to prevent binding. Operating Instructions Speed Selection Stop the spindle.

Consult the speed chart on the front plate of the headstock.

Use a standard drift key to remove MT3 tools. Never strike the spindle directly with a hammer. Strands S68 Manual Pdf

Most S68 models require a high-quality gear oil (ISO VG 68 or equivalent).

Apply a light coat of lithium-based grease to the rack teeth and the external surface of the quill to ensure smooth vertical movement. Keep the vertical screw clean and lightly greased

On models with belt-to-gear hybrids, ensure the primary drive belt is taut but not overly tight, which can cause premature bearing wear.

Check the oil level monthly. The oil should sit halfway up the sight glass located on the side of the headstock. Greasing Points Use a standard drift key to remove MT3 tools

The S68 features a precision depth stop. Loosen the locking knob, set your desired drilling depth on the graduated scale, and tighten. This is essential for repetitive blind-hole drilling. Safety and Troubleshooting