Unlock Bootloader Using Termux Link ^new^

Depending on your device age/brand, use one of these commands: fastboot flashing unlock For older devices: fastboot oem unlock

Connect the two phones using the USB OTG cable. The host phone (with Termux) should be connected to the "USB-A" side of the adapter, and the target phone should be connected to the "USB-C/Micro" side.

On the "Host" phone (the one with Termux installed), open the app and run the following commands to set up the necessary tools: unlock bootloader using termux link

pkg update && pkg upgrade pkg install tur-repo pkg install android-tools Use code with caution. Step 3: Connect the Devices

If you see a serial number followed by "device," the link is successful. Step 5: Boot into Fastboot Mode Depending on your device age/brand, use one of

You must install the platform tools within the Termux environment. Step 1: Prepare the Target Device On the phone you want to unlock:

This allows you to connect two phones together. Step 3: Connect the Devices If you see

Enable (Crucial: If this is greyed out, connect to Wi-Fi or wait a few days as per your manufacturer’s policy). Enable USB Debugging . Step 2: Install ADB & Fastboot in Termux