Niton Xlt 898 User Manual

XRF is non-destructive, but surfaces should be clean. Remove surface oxidation or paint for the most accurate results. Initiating a Test: Place the measurement head flush against the sample.

Depending on your region (e.g., the Niton UK guidelines or Singapore regulations ), a specific user license and formal Radiation Safety Training are often legally required. 4. Data Management and Software Niton Xlt 898 User Manual

Use the Tools Menu to set up "Avg Forward" protocols. This allows the analyzer to automatically calculate and store an average reading over a specific number of tests. 3. Essential Radiation Safety Because the Niton XLt 898 XRF is non-destructive, but surfaces should be clean

The device includes an auto-shutdown feature that stops X-ray production if power fails or if the shutter is obstructed. Depending on your region (e

The system is password-protected for safety and security. Enter your assigned password via the touch-screen interface to access the main menu. 2. Operation and Testing Modes

Press and hold the power button for several seconds. The unit requires a brief boot-up period to initialize the system electronics and the high-resolution Si-PiN detector.

Before using the device, ensure the system is properly assembled and charged. The Niton XLt 898